Flexform™ Deep Draw Presses for versatile, economical low-volume sheet metal hydroforming
Today, the technology is a preferred method for economical low-volume part fabrication, particularly for the forming of tough alloys for jet engine components.
Quintus Technologies is also highly respected for its skill in the fabrication process analysis, the forming process optimization, innovative tool design, systematic project management, and on-site technical support.
Quintus offers a line of standard deep-draw press models with forming area/diameter ranging from 800 mm (31.5 in) to 1100 mm (43.3 in). Pressure typically 800 bar (11,600 psi). The cycle time is depending on the tool size and the pressure level required, but normally range from 30 seconds to two minutes.
Pressure typically 800 bar (11,600 psi).
The cycle time is depending on the tool size and the pressure level required, but normally range from 30 seconds to two minutes.
Tray diameter ranging from 800 mm (31.5 in) to 1100 mm (43.3 in).
Quintus offers a line of standard deep-draw press models with forming area/diameter ranging from 800 mm (31.5 in) to 1100 mm (43.3 in).
