What industries use the Flexform technology?

All manner of materials can be heat treated with solutionizing steps in the HIP. Aging can also be performed on hardenable alloys to bring strength up with pore-free microstructures. Ceramic materials such as silicon nitride can also benefit from much higher cooling rates than previously possible. Both of these are helped by the pressure inside the vessel.

Uniform Rapid Cooling, URC®, is a Quintus invention which enables uniform cooling of the payload. Forced convection of high temperature and high pressure gas over a heat sink enables controllable cooling of the gas. URC® is used for metals as well as ceramic materials, to increase productivity and heat treat parts.

Uniform Rapid Quenching, URQ®, is a Quintus invention which enables high speed quenching of the payload, at similar cooling rates to gas quenching. Cold gas in the HIP is exchanged with the hot gas in the furnace at a very high rate, effectively quenching the payload in a uniform way with minimal induced stress.

Quintus has developed routines to ensure a clean atmosphere during the HIP cycle, leading to lower risk of oxidation during processing compared with traditional methods. This technology is new, and will revolutionise clean processing inside the HIP.

HIP uses a furnace inside a pressure vessel. Very high pressure gas, usually argon at elevated temperature, is used to consolidate material and remove internal defects such as porosity and microcracks. As HIP uses temperatures very close to those used for heat treatment, creep and diffusion occur, along with mechanical deformation of defects due to extreme external pressure.

Flexform is a low-cost sheet metal hydroform technology, ideally suited for low volume production. Flexform use only one single rigid tool half and a flexible rubber diaphragm, backed up by high-pressure hydraulic oil. Typical Flexform production volumes range from a few parts per year and per tool, up to a few thousand parts.

Beside the final part quality, the main perceived benefit is the low fabrication cost. This due to the low tool cost involved. The process also allows for several tools and parts to be produced in one and the same forming operation. 50-90% of conventional 2-piece tool cost may typically be saved by using the Flexform technology.

From thin foil up to ~10 mm sheet metal may be formed, typically however thicknesses of 1-5 mm are used, including traditional aerospace aluminum alloys, stainless and most mild steel alloys. Tough alloys such as Inconel and titanium may also be formed.

Within the aerospace industry the use of high-pressure typically reduce, or even eliminate, the need for labor hand correction and the need for intermediate heat treatments.
In all applications the high-pressure support forming of complex and intricate shapes, at excellent repeatability and part quality.

As a science based technology, HPP is not only fully recognized by global regulatory bodies as an antimicrobial process with superior capabilities for inactivating many food pathogens of concern, but also for slowing down the growth of spoilage bacteria, thereby extending refrigerated shelf life between 2-10 times longer than unprocessed foods.  Both these benefits alone can have a significant
impact on the global challenges of food safety and food waste.

Most conventional food processing methods such as heat and/or chemicals have negative effects on health and nutrition. Consumers are demanding high nutritional values in foods, particularly those present in fresh, raw, or minimally processed varieties. HPP does not affect nutritional components in foods largely because it has no effects on covalent bonds so HPP products maintain their vitamins and bioactive compounds.

Manufacturers using HPP eliminate chemical preservatives used to control microbial growth and reduce the frequency of food safety testing, thus satisfying the demand from customers for preservative-free foods, while reducing operational costs, hence delivering higher company values. HPP has thus become the process of choice among non-thermal food processing technologies. The
assurance of inactivating foodborne pathogens, post packaging, provides food and beverage manufacturers the business-critical food safety confidence for protecting their consumers, as well as ensuring that their brands and company reputations remain untarnished.

HPP is commercially used in wide range of foods and beverages such as ready-to-eat deli meats, fruit and dairy based drinks, baby foods, dairy products, pet food, ready meals, ready-to-cook marinated meats and meals, seafood, and wide variety of plant-based products including guacamole, hummus, salsa, ready-to-eat salads, tofu and plant-based protein meat analogues.

Most food and beverages are applicable for HPP technology. However, certain intrinsic and extrinsic factors are important in determining HPP conditions and satisfying regulatory rules and guidelines.

We support the customers throughout the complete HPP development process. From recipes to packaging to designing and providing in-house validation services. Our comprehensive evaluation and support is geared for getting your product in the market quickly.

Our Quintus ® Care Program reflects our culture of true partnership, as witnessed by near three quarters of a century pioneering pressure technologies. Your immediate and long term benefits of Quintus ® Care includes controlling ongoing operational costs, guaranteed access to parts, regular technical reviews and remedial training, application support, as well as opportunities to participate in ongoing educational seminars

During HPP the pressure reaches up to 6,000 bar (87,000 psi). At this pressure, products will compress approximately 15% of their volume, meaning that HPP packaging must be waterproof, hermetically sealed, and include materials which are flexible to withstand compressions of at least 15%. For these reasons, different plastic materials have traditionally been a popular choice for HPP since many of these are flexible enough to allow containers to compress without breaking and elastic enough to retake their original shapes after the process. Additionally, several sustainable alternatives can be used with HPP such as rPET, PP, PLA and other biodegradable solutions.

Commonly used packaging and materials for HPP include bottles, cups, pouches, trays, in combination with various types of films or closures. Sealing surfaces for films need to be relatively wide, uniform and preferably flat. Sealability (heat seal strength) is an important element for packaging that is subjected to HPP. Cross-hatched patterns are not suitable as they can allow oxygen
diffusion into the packages that will contribute to oxidative deterioration of products.

Please contact us as below:

• EUROPE: support@quintusteam.se
• AMERICA: support.us@quintusteam.com
• ASIA-PACIFIC: support.apac@quintusteam.com

or use our contact us form – Contact | Quintus Technologies.

We support customer in priority order. Our Quintus care full customers are priority, secondly our Quintus care base customers and after that the broader market. Each Quintus care customer has a Key Account Manager to feed the dialog through Quintus services to you as customers.

Do you want to know more about Quintus care?

With over 70 years of expertise, we are the global leader. Many of our machines operate reliably after more than 40 years. However, even the most advanced technology can occasionally face challenges.

Discussion with our support team helps to ensure any potential problems are addressed promptly and efficiently. We can help you minimize downtime and maintain optimal performance. The applied strategy for uptime is:

• Service the machine preventatively according to best practice time/cycle-based schedule
• Prepare for the unforeseen failure, with Quintus Technical Support service included in Quintus Care, so that it does not cause major disruptions in the production.

Studies shows that maintenance cost for a normal machine within the Industrial sector is around 6-7%/year of the investment and our full fledge Quintus Care is normally well below that. The full fledge SLA allows you to control all the cost for the material. Whereas the base agreement leaves the material portion open for sourcing to Quintus on need basis, or towards other suppliers.

Over the years we have developed our service level agreements; Quintus care in two main offers.

The base offer gives you support priority, remote tech support, application support (some countries this cannot be offered to), annual f2f trainings and annual maintenance, safety and reliability inspection.

Quintus care full additionally to the base also includes all spare parts for preventative maintenance, as well as covering spare parts if something unexpected happens (with some exceptions).

Being proactive about maintenance with a Quintus care contract keeps your costs planned and secures the best possible uptime for your system.